e57

Completed

Comments

8 comments

  • Avatar
    Wishgranter
    Hi chris

    the E57 is almost ready to deploy, that mean if everything go well with testing it will be in next update.

    What scanner yo you have that it not support PTX export ?
    0
    Comment actions Permalink
  • Avatar
    stevenramsey123
    I think it is only Riegl that don't support PTX directly, unless you are not talking about a static TLS
    0
    Comment actions Permalink
  • Avatar
    chris
    thanks that sounds good.

    I'm only looking at hiring one.

    but I-Site 8820 is an option, maybe z+f is an option.
    0
    Comment actions Permalink
  • Avatar
    Wishgranter
    hi chris

    the I-Site 8820 is a LONG range scanner = not good for "close range"
    look on its brochure and see its have not very good resolution !!!!!

    the Z+F is a much much better option... its close range scanner = max +- 100m and get very good quality scan and resolution
    0
    Comment actions Permalink
  • Avatar
    chris
    yes i am aware of that.

    will test it out before using any seriously. but i wonder if the lower res is really a problem when added into rc with lots of photos. for some of the things i'm thinking for more than 100m would be useful, but not necessary. but i get why your saying the z+f is probably the better option.

    one thing the i-site can do. which i think must be a very new feature added. is that it can produce a textured 3d model without any post processing. I haven't seen any samples of this yet, but it sounds interesting. I cant imagine it would produce something like what rc can though.
    0
    Comment actions Permalink
  • Avatar
    Wishgranter
    Hi Chris

    highly recomend to read the I-Site 8820
    and again im say its a LONG range scanner with very powerful laser "ray beam" that mean on short (0-100m ) ranges it have a plenty of issues related to the ray beam strength.

    The Z+F is much much better solution as its CLOSE range scanner.

    can try it yourself and get to same conclusion......
    0
    Comment actions Permalink
  • Avatar
    chris
    thanks for your input, i appreciate your thoughts on it.
    0
    Comment actions Permalink
  • Avatar
    Lucia CR
    The e57 support for point-cloud import has just been released -> Version 1.0.2.1976 RC release
    0
    Comment actions Permalink

Please sign in to leave a comment.