CO-ORDINATES OF OTHROPHOTOS
Hi
I am using RC for my building surveying work and the principle output for this is othophoto's of building elevations.
The quality of orthophoto which can be generated in RC is great. However, I need to be able to relate the orthophoto's to exact elevation and section lines and to the site datum level.
In order to do this it would be very helpful if it were possible to get a read out of the x,y,z co-ordinates of each corner of each orthophoto. It would then be much easier to accurately align the orthophotos in photoshop.
What would also be very helpful would be the ability to generate an othophoto along a defined section line (e.g between two specified x,y co-ordinates.
Kind regards
Robbie
I am using RC for my building surveying work and the principle output for this is othophoto's of building elevations.
The quality of orthophoto which can be generated in RC is great. However, I need to be able to relate the orthophoto's to exact elevation and section lines and to the site datum level.
In order to do this it would be very helpful if it were possible to get a read out of the x,y,z co-ordinates of each corner of each orthophoto. It would then be much easier to accurately align the orthophotos in photoshop.
What would also be very helpful would be the ability to generate an othophoto along a defined section line (e.g between two specified x,y co-ordinates.
Kind regards
Robbie
-
hello,
I would also welcome (terrain) spot heights and measuring scale printed in the exported orthographic projections;
you may find the already available Depth and Altitude maps (2D ORTHO tab / Source / Input Layer) useful here;
you can create a section elevation with the combination of the reconstruction region and the Ortho Projection tool
Please sign in to leave a comment.
Comments
2 comments