Out of memory when browsing images

Answered

Comments

5 comments

  • Avatar
    martinb
    Hi Boris,
    thanks for the report. The cache should not exceed 200MB so it looks like a bug. We will check it.
    0
    Comment actions Permalink
  • Avatar
    peterwatson
    I had the same issue yesterday when I ran RC on my work laptop- it is only 16GB ram but after a fair bit of scrolling thru images for placing GCPs (project had ~2000 images) it was giving me an out of memory error and windows was requesting to shut down RC. Instead I saved and did a re-boot- which improved for a while then had to re-do a while later.

    On this topic- what will improve the speed of the image display in the 2d window- when placing GCPs and scrolling thru images with the left / right keys it can take a little while to get a proper image (ie. not pixelated preview) image appear... just wondering what hardware or software settings would speed this up?

    thanks
    0
    Comment actions Permalink
  • Avatar
    Wishgranter
    Hi Peterwatson

    To speed it up only SSD can help....
    0
    Comment actions Permalink
  • Avatar
    peterwatson
    Thanks Wishgranter, luckily this machine has space for another drive, so I will put in a decent size SSD when I get a chance. From reading the machine specs it will also take a nvme drive as well ( HP zbook 17 G2) but this will default to boot drive so I doubt I can do this on a corporate machine- would need a re-install of operating system which isn't easily achieved/allowed.

    Will I get a decent performance boost by installing a secondary SSD drive and running RC projects on this? Are there settings within RC that I would need to define to run this SSD as scratch disk so it's using the solid state memory not the slower boot drive?
    0
    Comment actions Permalink
  • Avatar
    admin
    Hi Peter,

    we have fixed the issue. It will be fixed in next update. Thanks for reporting again.
    0
    Comment actions Permalink

Please sign in to leave a comment.