Find non-registered images

Answered

Comments

5 comments

  • Avatar
    Wishgranter
    Hi Shahzad

    1- I have a project with 599 Images. Maximum registered Images are 554. How can I find non-registered Images and what is quicker way to register these Images with registered Images.

    Its mean the remaining images have probably low overlap or too strong angles to each others, its mean you need more overlap and good angles between them.

    first delete all other COMPONENTS except the biggest one and use these settings for alignment.
    Alignment_settings.jpg



    2- Secondly I have added control Points (ground control Points). Thes Points have x,y,z also. B13, B3 are not showing Errors. It means they are not used by the Programm. What can be the reason? Clicking on Images (SDIM2765.jpg....2767.jpg ) Shows they are registered.


    Not showing errors mean they placed properly and even after alignment they are very well solved...

    for the remaining GCPs that you see NO information its mean they are NOT in that particular selected COMPONENT...
    0
    Comment actions Permalink
  • Avatar
    Lucia CR
    Shahzad wrote:
    1- I have a project with 599 Images. Maximum registered Images are 554. How can I find non-registered Images and what is quicker way to register these Images with registered Images.

    Registered images have a small green dot in the upper-right corner in their 2Ds view:

    Capture.PNG

    You can join registered images with those unregistered using control points and start a new alignment.
    0
    Comment actions Permalink
  • Avatar
    Lucia CR
    Since version 1.0.2.2742 you can also display unregistered images in the 2Ds view: click an image in the 2Ds view, and choose "unregistered" from the 2D scene context tab at the top of the application.
    0
    Comment actions Permalink
  • Avatar
    Alice

    How do you show multiple images next to each other?

    For me, only 1 image is displayed in the 2D window.

    Even when I have 4 images selected.

    When I drag 2 images from the 1D view to the 2D view, the file names are shown in the 2D window, not the actual images. Also, the 2D window changes to 1D view.

    When I put it back to 2D view, the window shows the message "Drag&Drop an image object from the scene view..."

    0
    Comment actions Permalink
  • Avatar
    Lucia CR

    hello Alice,

    I believe you have found your answer, having read this: https://support.capturingreality.com/hc/en-us/community/posts/360001299611--NOT-A-BUG-Unable-to-show-multiple-images-in-2D-view

    0
    Comment actions Permalink

Please sign in to leave a comment.