My thoughts so far.

Answered

Comments

3 comments

  • Avatar
    Wishgranter
    Hi Thanasis Davlouros
    Looking at the image count of 68 images, from my experience it’s a quite low number for an interior... hard to say how many of the images you need in the particular project but 68 images for a small room can’t give enough overlap, especially not when the room has a lot of objects.
    Is it possible to make a screenshot of the cameras in the room + one image so that I can see the interior and say a bit more how to solve it ??
    0
    Comment actions Permalink
  • Avatar
    Thanasis Davlouros
    I started with 1563 photos but I can't align them due to this error:
    Bug 519: Unexpected program state [ERROR]

    I gradualy lowered the number of photos but always getting a lot of components.

    Image
    0
    Comment actions Permalink
  • Avatar
    Wishgranter
    Hi Thanasis Davlouros
    Ok, so from 1,563 images you used just a very small number :D

    I see the images are captured in low light ( looking at the "reddish" colors ) so I hope the images are without too much noise and are sharp ( captured as RAWs and properly developed ).
    As for the alignment, use these settings and add images by say count of 100 images, after every alignment make a SAVE, so that you can pinpoint the problematic ones that fail in the alignment... Hard to say what for issue is there, look if some of the images aren’t captured from the same position...

    Alignment_settings_80k.jpg
    0
    Comment actions Permalink

Please sign in to leave a comment.