Output of georeferenced data

Answered

Comments

8 comments

  • Avatar
    Wishgranter
    Hi Bodo S.

    Its possible to get the data used here or even better to take a remote access session ? its probably just a setting issue..
    0
    Comment actions Permalink
  • Avatar
    Wishgranter
    Problem solved by exporting in proper COORDINATE SYSTEM ( Not WGS84 )
    -1
    Comment actions Permalink
  • Avatar
    achoquel

    Good mornig, i from peru and i speak english a Little. I have the same problema in the last versión. Here there isn´t "Coordinate System" ….can you help me??? 

    0
    Comment actions Permalink
  • Avatar
    Jasper Mink

    Do you mean by here, in Peru?  If so, here is a list of coordinate systems used in Peru:

    https://epsg.io/?q=Peru

    0
    Comment actions Permalink
  • Avatar
    achoquel

    1.- I start programa with Coordinate Systems 5387 Peru96/UTM Zone 18S in:  Project Coordinate System and Output Coordinate System  (3.jpg)

     

    2.- Pictures have Lat/long

    3.- When proceded Ortophoto coordinate system is epsg:4326 - GPS (WGS 84)  (not coordinate Project system)  (1.jpg)

    4.- Digital Surface Model export in epsg:4326 - GPS (WGS 84) (2.jpg y 4.jpg)



     

     

    0
    Comment actions Permalink
  • Avatar
    achoquel

    this pictures are a fast example

    0
    Comment actions Permalink
  • Avatar
    achoquel

    the ouput coordinate are latitud and longitud and not UTM....i need UTM

    0
    Comment actions Permalink
  • Avatar
    Jasper Mink

    Hi Achoque,

    I think you can fix it by expanding the "Info" box in the "Ortho Projection Tool" panel. Right at the top of the expanded list it will say  "Coordinate system". Could you check those settings if they match up with your desired coordinate system?

     

    0
    Comment actions Permalink

Please sign in to leave a comment.