Texture blurry

Comments

4 comments

  • Avatar
    Lucia CR

    hello, a similar issue:

    https://support.capturingreality.com/hc/en-us/community/posts/115001394792-Blurred-textures

     

    0
    Comment actions Permalink
  • Avatar
    Fernando

    Thanks Lubenko, but no solve in the post you said

    0
    Comment actions Permalink
  • Avatar
    Götz Echtenacher

    Hi Fernando,

    your detector sensitivity is set to ultra, which might introduce weak points for orientation. I would leave that at the standard setting until you have an extremely difficult model.

    You are probably right about the alignment being the cause. You need to inspect the model and try to find misaligned parts. Either use the inspection tool or look for doubled surfaces in the sparce point cloud. If you find them, then you need to improve the alignment until you are satisfied.

    Did you try using another distortion model? Brown 4 works best for me - depends on the camera and lens.

     

    0
    Comment actions Permalink
  • Avatar
    Fernando

    Hi Gotz. Thanks for your reply.

    the detector sensitivity is set to ultra but i tried in normal mode before with similar results.

    I dont have test other distorsion model, but i´ll try it. Now is Brown 3

     

    Thanks

    Fernando

     

    0
    Comment actions Permalink

Please sign in to leave a comment.