no sufficient cuda capable device

Answered

December 23, 2019 18:06

have been testing for the past few days with no issues, today every time i try to run a solution i get the error no sufficient cuda capable device.

this is win10 with a K3100M & RC beta1.0

please advice.

Comments

5 comments

Erik Kubiňan CR

December 27, 2019 11:04
Hello dear user,

Please do try to install the newest Nvidia driver for your graphics card, if this doesn't help I am afraid your graphics card could be too outdated but first surely try the drivers first.
0

Comment actions Permalink
leolovera

December 27, 2019 17:05
will do

thanks!

leo
0

Comment actions Permalink
leolovera

January 03, 2020 01:33
i think the issue is something else, some kind of preference that i changed.

original test was fine, then i decided to add more details and that is when it broke.

now pretty much all the reconstructions i run fails, even after updating the drive.

how can i completely reset the software to original conditions just like a fresh install?
0

Comment actions Permalink
Erik Kubiňan CR

January 03, 2020 07:55

Edited
Press shift and double click on the RC desktop icon, there you can make it like a clean install if you select so in the dropdown menu. Please report back whether it fixed your issue.
Also, what do you mean by first it ran fine then "I added more detail"? Please be more specific, this could help us find out what's going on.
0

Comment actions Permalink
Dillon from MCWB Architects

January 03, 2020 13:48
leolevera, I have had a similar issue in which my graphics card isnt recognized. I wrote up my experience here:

https://support.capturingreality.com/hc/en-us/community/posts/360006525539--Your-Computer-Does-Not-Have-a-Nvidia-Graphics-Card-

Granted, this was an issued with the graphics card, not a cuda capable device, but I seem to remember some correlation between the two. Best of luck.
0

Comment actions Permalink

Please sign in to leave a comment.

Comments

Didn't find what you were looking for?