Alignment with model movement, too many alignments in component?

Been cooking this software for some time and finally am getting good results getting high numbers of components to align. However I know my model has slight movement before I can get 800 pics completed. Now I get too many alignments connected that should not be and cannot separate them. Attached is a gross example that will be self explanatory. I tried selecting the off points in the alignment and finding the cameras with the hopes of deleting those pics but no luck. Since I know the root cause if model movement, I would be happy with individual meshes and massage and put together manually but I cannot see a way to not only separate the poses, but even to stop it from putting them together to begin with.

Any help would be appreciated.

David Dolata

August 02, 2018 02:12
Edited

Forgot the attachment...

{The reprojection is set to 4px, high I know but this is not 4px and setting it to 1 doesn't help.}

ShadowTail

August 02, 2018 07:37

A possible solution for your dilemma would be to use a camera rig such as the one shown here: https://photogrammetry.irc.umbc.edu/

But that can be quite expensive to build.

Götz Echtenacher

August 06, 2018 06:48

Hi David,

there is no attachement, but you can define for each image individually if it shall be used for texturing, meshing and/or alignment. Just select it and the settings will pop up in the 1Ds window.

Alignment with model movement, too many alignments in component?

Comments

Didn't find what you were looking for?