Ryzen 7 crashes during reconstruction Help!

Answered

Comments

5 comments

  • Avatar
    Vektra

    I have similar problem.

     

    My rig:

    AMD TR1950X
    GIGABYTE X399 AORUS GAMING 7
    GIGABYTE GTX 1080TI + ASUS 980TI
    128GB DDR4
    2TB SAMSUNG 960 M2 SSD

     

    but again, I have same problem with XEON rig :D

     

    0
    Comment actions Permalink
  • Avatar
    rubenlangeweg

    Same problem here, but...not always. Feels like I have more troubles on our AMD Ryzen rig then the Intel Rig. 

     

    Rig:

    AMD TR1950X

    Gigabyte X399 DESIGNARE EX

    MSI GTX1080 Ti Gaming 11G

    2 x Samsung  m.2 970 Pro 500gb

    2 x Intel SSD 750 PCI 500gb

    Some ram

     

    Also Steam and our full RealityCapture lic.

     

    Cheers,

    0
    Comment actions Permalink
  • Avatar
    yoz

    Hi,

    I already had a similar issue on big project (2500imgs, more than 200 laser scans).

    Step 1 : PSU

    Do you have a sufficient PSU ? You can check your PSU capacity here : https://outervision.com/power-supply-calculator

    Despite my PSU replacement (by a Corsair 1200W), i had continued with my issues.

    Step 2 : RAM frequency

    I have resolved my problem by adjust the RAM frequency regard to the CPU and the motherboard. From default, my RAM (64GB) was set to 3000MHz. I have fixed my crash issue by fix the RAM frequency to 2400MHz...

    And since, never have a new crash......

    If it can help you.

    Good luck !

    2
    Comment actions Permalink
  • Avatar
    david 2

    Thanks Yoz,

    my RAM was set to the wrong MHz.. Now it's set to 2400 and had no problem so far. 

    such an easy fix... 

    For everyone else who has problems with crashes should check the RAM in the bios and read the manual for mainboard and CPU.

    Cheers, 

    David

    1
    Comment actions Permalink
  • Avatar
    Lucia CR

    very good point, thank you, I also came across it in one textbook for IT yesterday, where it says: "before you add memory, change the BIOS settings"

    0
    Comment actions Permalink

Please sign in to leave a comment.