Laser Scanner + Photogrammetry for statue seperate components - attached photos

Comments

6 comments

  • Avatar
    josh

    Alignment settings + Advanced

    0
    Comment actions Permalink
  • Avatar
    Götz Echtenacher

    Hi Josh,

    from just a quick glance the sets look fine and should work.

    Looking at your settings, I would change:

    Max feature reopro error: 2.00 (otherwise too many will be discarded right at the start)

    Force component rematch: False  (otherwise all your existing components wiil not be considered, maybe even the geo-referenced alignment of the scans)

    Preselector features: 10k (should be enough and otherwise just creates a lot of work)

     

    0
    Comment actions Permalink
  • Avatar
    josh

    Hi Götz,

    Just want to say thanks for the quick reply!

    I adjusted the settings as you recommended, and It has been a successful alignment of all images and scans!

    I've read many of your answers and questions through-out my time scouting the RC forums. Thanks for those times and for answering this query. 

    Josh

    0
    Comment actions Permalink
  • Avatar
    Götz Echtenacher

    Hi Josh,

    glad it worked and appreciate your reply!  :-)

    Do you know which setting it was exactly?

    0
    Comment actions Permalink
  • Avatar
    josh

    Hi Götz,

     

    Sorry for the late reply, 

     

    I quickly tried doing some tests to determine which setting it was, but I couldn't recreate the problem after I used the settings you suggested. I assume the correct alignment is cached, I tried clearing it but but the components kept aligning, I will set aside some time to test and post back in here soon if I can figure out which setting it was in particular.

     

    Thanks again

    0
    Comment actions Permalink
  • Avatar
    Götz Echtenacher

    Hi josh,

    thanks, but don't go through too much trouble!

    Maybe the next one with the same problem can answer it...  ;-)

    0
    Comment actions Permalink

Please sign in to leave a comment.