How to check the matching rate between the manufactured model and the image based on the model

Comments

8 comments

  • Avatar
    Ondrej Trhan CR

    Hi yunsik79, not sure what you want to achieve. 

    You can use inspection tool which will show you bad aligned images https://support.capturingreality.com/hc/en-us/community/posts/4409723827986-Inspection-Tool

     

    0
    Comment actions Permalink
  • Avatar
    yunsik79

    I'm sorry, but I'll explain again.
    I want to see how accurate the model is based on the image.

    To that end, is there a function to compare the actual image taken with the model made using the image in real time within the RC program?

    As shown in the picture below, is there a function where I can compare 2D images and 3D models using RC functions instead of manually placing them in the same position? (Except for image renders)

     

     

     

     

    0
    Comment actions Permalink
  • Avatar
    yunsik79

    0
    Comment actions Permalink
  • Avatar
    Ondrej Trhan CR

    Is this what you mean:

    ?

    For this you just drag and drop image from 1Ds view to 3D view. Or you can assign color bar to 3D view and just select images in 1Ds view.

    For this will be better the mentioned Inspection tool, to see it complex. which images are aligned well and which not. 

    0
    Comment actions Permalink
  • Avatar
    yunsik79

    Can you compare the 2D image in the same resolution condition instead of blurring it as shown in the picture?

    0
    Comment actions Permalink
  • Avatar
    Ondrej Trhan CR

    No, it is not possible.

    I can create a feature request for this if you wish.

    0
    Comment actions Permalink
  • Avatar
    yunsik79

    Yes, I think it's a really necessary function.
    If you could create this function, when would you be able to schedule it?

    Or is there a way to do what I needed to do through another program as above?

    0
    Comment actions Permalink
  • Avatar
    Ondrej Trhan CR

    I can create just a request for this function. Then it will be on our developers, if they decide to implement it. Also, if there will be another demands for this function, it can increase its priority.

    This is similar to what you need, but not sure, if you can find the precision from it: https://www.youtube.com/watch?v=yq0XjvBlsiU&t=1s, https://www.youtube.com/watch?v=KU8iCXTYeCY&t=342s

    0
    Comment actions Permalink

Please sign in to leave a comment.