Ortophoto facade

Follow

Dronezero_

• May 01, 2022 10:06

I have a doubt that I cannot resolve about the use of the software.
I have a point cloud of an apartment building facade, not aligned with the eaves line.
I have to do an orthophoto of the facade but to create an "eye" ortopiano I'm not sure to be correct.
My orthophoto MUST be perfectly parallel to the facade of the building.
Is there an analytical way to do it perfectly?
For example by imposing a plan that passes through three points resting on the facade, or more points on the facade so that it can make an intermediate plan?
I hope I made myself understood also using Google Translate
Thank you if you can help me
Thanks
Greetings from Italy

0

• 

  Ondrej Trhan CR

  • May 02, 2022 08:28

  Hi Dronezero_,

  as you mentioned, using CPs on the wall will be the simples solution. You can place these points over the façade and then us tool Set region from control points

  

  This tool will create reconstruction region over the façade and can be used for ortho creation.

  0

  Comment actions Permalink

Please sign in to leave a comment.