"Live" photogrammetry modelling

Comments

6 comments

  • Avatar
    Ondrej Trhan CR

    Hi Felix,

    for second script you need to firstly open RealityCapture application and then start adding the images into folder. Also, you need to have the script next to the folder of image folder.

    If you have ENT license you can also use Real-time assistance: https://support.capturingreality.com/hc/en-us/articles/360018842059-Real-Time-Assistance-feature-in-RealityCapture-1-1-1-Blaze 

    0
    Comment actions Permalink
  • Avatar
    felix_pedrotti

    Hi Ondrej 

     

    thank you for your quick reply. I have the project folder set up as following (see attached picture) and had RC open.

    While I am running RC and the alignAfterAddingImages.bat file, I add images to the folder and the .bat-script recognises these images, but RC gives me a notification that the software failed to add images.

    Currently I am using a PPI license, could that be the problem? Thank you again for your help.

    0
    Comment actions Permalink
  • Avatar
    Ondrej Trhan CR

    What you write here:?
    The whole path or just Images?

    0
    Comment actions Permalink
  • Avatar
    felix_pedrotti

    The whole path E:\....\RealityCapturetest loop\Images

    0
    Comment actions Permalink
  • Avatar
    Ondrej Trhan CR

    Just Images is needed in that CLI.

    0
    Comment actions Permalink
  • Avatar
    felix_pedrotti

    That worked! brilliant thank you very much!

    0
    Comment actions Permalink

Please sign in to leave a comment.