
Götz Echtenacher
i5 4460 - GTX 750 4GB - 850 EVO - 32 GB Ram
- Total activity 2626
- Last activity
- Following 0 users
- Followed by 6 users
- Votes 19
- Subscriptions 625
Activity overview
Latest activity by Götz Echtenacher-
Götz Echtenacher commented,
Hmm, manuals are practical, aren't they? :-) Factory settings will re-set all settings to the way the developers indended it to be, so the best for most cases.
-
Götz Echtenacher commented,
I never used markers but I guess they produce tie points or ground control points in the end? You can then just import ground control points via txt file. If your points have the same names in the ...
-
Götz Echtenacher commented,
Hi Tuomas, ah interesting. So you are saying that you use the XMP workflow for the 6 LSPs but RC still moves them slightly? Do you have enough scans to cover all the important surfaces at good angl...
-
Götz Echtenacher commented,
Hi tuomas, some indication of how big those alignment errors are would be helpful, ideally via screenshot. I've never tried anything similar nor remember reading anything about it in the forum, so ...
-
Götz Echtenacher commented,
Hi Sven, sure you can do that. There are plenty of posts on rigs here in the forum. Since I've never done it myself I can't really say more than that...
-
Götz Echtenacher commented,
Hi Ivan, did you detect the markers within RC or with an external app?
-
Götz Echtenacher commented,
Hi Ellison, shame there are no replies yet. I've always been wondering about that distinctions too. Although I haven't made any tests to figure it out, your idea seems quite reasonable to me. Any D...
-
Götz Echtenacher commented,
Hi Chae Bi-Ryong, as far as I know there shouldn't be a limit like that in the demo. It's no surprise that your first try didn't work out because RC requires ordered pointclouds (as in individual s...
-
Götz Echtenacher commented,
Hi Irad, that might indeed be a clue. It could be that the model isn't textured but only hat vertex colours. Would be interesting to know if that's the result of a bug or caused by user interventio...
-
Götz Echtenacher commented,
Hi Scott, what's your CPU specs? 1000 images should not take several hours to align. Did you try smaller batches of, say, 250 each? Nino, the pause around 75% (it's most often 73% on my machine) is...