Avatar

vilem.duha

  • Total activity 15
  • Last activity
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 1

Activity overview

Latest activity by vilem.duha
  • Avatar

    vilem.duha created a post,

    Adaptive blending start - increase the limit value over 0.5

    Completed

    I'd like to ask for a change - increase the limit of "adaptive blending start" parameter over 0.5I have a camera rig for scanning people, and have problems with some border areas of the models...

  • Avatar

    vilem.duha commented,

    thanks for your replies guys.Chris, you were right, it was a power supply issue - i have a PSU with capacity of 825W, which should be more than enought for the machine which basically has only...

  • Avatar

    vilem.duha created a post,

    Rc capture shuts down computer suddenly

    What happens is that when starting reconstruction(after successfull alignment) computer shuts down immediately.I render many animations on the GPU and use it extensively in my work, so I don't...

  • Avatar

    vilem.duha commented,

    Thanks for the info, I also read elsewhere that cuda actually doesn't allow setting priorities between individual processess so far.External GPU might be actually a good solution, although I d...

  • Avatar

    vilem.duha created a post,

    ability to set lower GPU load/ priority

    I am working with RealityCapture while travelling. I have a "mobile workstation' with 32 gb ram and a nvidia 880m 8gb gpu. However, processing in RC takes currently most my working time, since...

  • Avatar

    vilem.duha commented,

    Arsenyi, some more tips:try setting in alignment settings image downscale factor to 1I am in a similar situation, reconstructing some data from a not much rich camera array(only 11 cams).This ...

  • Avatar

    vilem.duha commented,

    I just can't find these in the documentation! ;)they are not there, or I don't know where to look.seems adaptive blending start is quite an important parameter. I'd love to get it a bit higher...

  • Avatar

    vilem.duha commented,

    Hi, one Idea, did you shoot raw photos?You can colorcorrect before processing, that might help too. Remember, also when you focus on your subject, your camera actually changes it's properties.

  • Avatar

    vilem.duha commented,

    well the difference here is manual vs fully automatic... Of course this wouldn't be precise, but I meant it for cases where precision isn't needed that much. Was just brainstorming ;)

  • Avatar

    vilem.duha created a post,

    Scale scene from focus distance?

    I guess maybe CR allready does this, but just to be sure. - From photo exif data, the focal distance can be read -the focal distance from the camera in the reconstructed scene (depth area with...