Avatar

jmatthews

  • Total activity 14
  • Last activity
  • Following 0 users
  • Followed by 0 users
  • Votes 1
  • Subscriptions 5

Activity overview

Latest activity by jmatthews
  • Avatar

    jmatthews commented,

    I've tried every combination of settings I can think of but for some reason the program ignores the camera prior settings. You can see the variation from the flightlog position with the orange line...

  • Avatar

    jmatthews created a post,

    Using point cloud data as laser

    Hello, I've got some point cloud data, as well as an .obj that is georeferenced. The data isn't up to lidar accuracies, but it gives a general shape of the surfaces I'm trying to model and or textu...

  • Avatar

    jmatthews created a post,

    Camera Prior Settings

    Hello, I'm doing some work with underwater images and I'm getting a banana effect on the solution. I have INS data, which should be in the cm range for X,Y,Z and tilt values that should be within 5...

  • Avatar

    jmatthews commented,

    Hello, I'm doing some work with underwater images and I'm getting a banana effect on the solution. I have INS data, which should be in the cm range for X,Y,Z and tilt values that should be within 5...

  • Avatar

    jmatthews commented,

    GCPs won't be possible unfortunately as it's a vertical surface without known features. The coordinates shouldn't be off by more than a meter, which I have chosen in the accuracy section. When I lo...

  • Avatar

    jmatthews commented,

    Hey, Thanks for the reply. Looks like I had an issue with selecting the project datum. I was able to import the flight log after adjusting that. After importing the flight log, I see that all of my...

  • Avatar

    jmatthews created a post,

    Error importing flight log

    Hello, I'm running into an error when importing a flight log "The flight log position is not valid for the given coordinate system (error 18004)". My coordinate system is set to wgs84, I've tried i...

  • Avatar

    jmatthews created a post,

    Import camera positions using spreadsheet

    I'd like to record camera positions using an INS, export the data with a timestamp, then import positions for each camera. I was wondering if there is a built in method to do this, or if I would ha...